JTS TG-10 Series Wireless Tour Guide Receiver with Single High Definition Earphone

TG-10R/WM-10TG

JTS

Whatsapp for enquiry Email for enquiry






* Handy and fashion outward.
* Preset 16 selectable UHF channels.
* Using Lithium cell to provide long operation time.
* Transmitter with built-in condenser capsule.
* LED display on both transmitters and receivers.
* Belt-pack and neck-set wearing.
* Earphone WM-10TG for TG-10R; earhook microphone CM-801S
for TG-10T.
* 60m operation distance.
* Compatible with stationary transmitter TG-10STX and receiver TG-10SRX.



WM-10TG

* Handy feature, broad angle ear set with ergonomic design ensures comfortable wearing.

* Audiophile quality semi closed, dynamic headphone.
* Powerful neodymium-ferrous rare earth magnet system.
* Lightweight copper-clad aluminum voice coils.
* The cord is terminated with a gold-plated Ø3.5 dummy stereo phone plug.
* Super thin 21mm dynamic driver with neodymium magnet structure provides crystal clear sound.


TG-10R
Model TG-10R
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 470~960 MHz
3x Frequency Range 856.100 - 864.900 MHz (F band)
606.500 - 629.900 MHz (U band)
721.500 - 748.375 MHz (G band)
658.125 - 678.500 MHz (D band)
487.125 - 506.500 HHz (I band)
502.000 - 694.000 MHz (T band)
LED Display Channel
Controls Power On/Off
Channel selection Voiume control
Audio Frequency Response 40~18,000 Hz
Output connector 1/8” Dummy stereo Phone Jack
Battery life 14 hours typical
Battery Lithium cell (3.7V, 1300mAh)
Dimension(mm) 54mm(W)* 17mm(D)* 99mm(H)

WM-10TG
Drive Unit Super thin dynamic driver with neodymium magnet
Frequency Response 0~15,000 Hz
Impedance 32Ω                    
Sensitivity(at 1000Hz) 126 dB/mW
Max. Input power 0.2W
Input Connector Gold-plated Ø3.5 dummy stereo phone plug
Weight 15.2 grams