The BS-1110W Speaker is specifically designed to reproduce clear announcements. The speaker also features a wide horizontal directivity owing to the vertical arrangement of speaker units, distributing announcements to a wider area.
| Rated Input | 10 W |
|---|---|
| Rated Impedance | 100 V line: 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 500 Ω (10 W), 1 kΩ (5 W) 4 Ω (10 W) |
| Sound Pressure Level | 92 dB (1 W, 1 m) |
| Frequency Response | 150 Hz - 14 kHz |
| Speaker Component | 12 cm cone-type × 2 |
| Applicable Cables | 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.2 mm 7-core twisted copper wire: 0.75 - 1.25 m㎡ |
| Connection | Push-in connector (Bridging connections possible) |
| Operating Temperature | -10 ℃ to +50 ℃ |
| Finish | Enclosure: Plywood vinyl coating, white (RAL9010 PURE WHITE)
Front: ABS resin, white (RAL9010 PURE WHITE), paint Rear: Steel plate, white (RAL9010 PURE WHITE), paint |
| Dimensions | 180 (W) × 360 (H) × 100 (D) mm |
| Weight | 2.9 kg (unit only) |
| Accessory | Mounting bracket…2 |
| Option | Applicable bracket: YS-301, SP-410, WCB-13W
Applicable stand: ST-16A |