WHARFEDALE PRO DVP-X Series 700 Watts RMS Dual 15" 2-Way Passive Loudspeaker

DVP-X215

Wharfedale Pro

Whatsapp for enquiry Email for enquiry






DVP-X215

700 watts
AES (RMS)
  • Dual 15″
  • 1.75″ IRIS X HF driver
  • 15″ LF drivers with 2.5″ coils
  • 700 watts AES (RMS)
  • 1400 watts Programme
  • 2800 watts Peak
  • 135 dB Max SPL @ 1 meter

The DVP-X range has been specifically built for hardworking musicians and DJ’s on the road. Covering all live applications this robust line up covers all sizes from a full range 12” through to the huge 138 dB 2 x 18” subwoofer.

The MDF cabinets of DVP-X series are protected by an enhanced version of Wharfedale Pro’s proprietary Rhino Rock paint. This finish gives improved protection against chips, dinks and clunks during transportation to and from the gig. DVP-X will look as good as new even after many successful tours, parties and events. The iconic Wharfedale Pro logo is also CNC routed into the cabinet design.

But DVP-X is more than just a strong cabinet. The drivers use the latest Wharfedale Pro driver technology. For the LF drivers, a curvilinear, double-roll surround is used for smooth mid-high transitions and stability for low through to mid-range frequencies. All models have 2.5” voice coils for improved thermal dissipation.

A 44mm diaphragm IRIS X4 HF driver is used throughout the range. Using a solid aluminium rear plate, the HF driver is strengthened for durability and heat is dissipated efficiently for high pressure use during prolonged time periods. Wharfedale Pro engineers have also selected a 90° x 60° elliptical waveguide optimised for wide coverage in multiple venues while touring.

Special attention has been paid to the port and port mouth to ensure a huge bass output with detail and minimised distortion. For the floor monitors, the port mouth lies parallel to the ground, creating a reflective boundary effect to guarantee low-end delivery. Each port on each speaker has been tuned individually for low-end punch.

  • Individually tuned front ported systems for clear, punchy bass 
  • Proprietary enhanced Rhino Rock paint for a chip resistant finish

  • Extended-range IRIS X Titanium dome HF drivers
  • High powered LF drivers using a double-roll surround
  • Fine-tuned crossovers, built in house for audio signal purity and optimised tuning 
  • HF limiters are installed for thermal protection against extreme power input 
  • 8 models in the passive line up


Model Name DVP-X215
System Type Passive
Configuration Two-way
Frequency Response (+/-3 dB) 45-18 KHz
Frequency Range (-10 dB) 40-20 KHz
Sensitivity (2.83 v / 1 m) 101 dB
Calculated Maximum SPL @1 m 135 dB
System Rated Impedance 4 Ω
Low Frequency Transducer  
Size 2 x 381 mm / 15″
Voice Coil Size 65 mm / 2.5”
Rated Impedance 8 Ω
LF Power (re:AES2-2012) 700 W
High Frequency Transducer  
HF Driver Type Compression Driver
Voice Coil Size 44 mm / 1.75″
Exit Size 25 mm / 1″
Diaphragm Material Titanium
Rated Impedance 8 Ω
HF Power (re:AES2-2012) 40 W
Nominal Coverage (H x V) 90°x60°
Nominal Impedance 8 Ω
Power  
System Continuous Power 700 W
System Programme Power 1400 W
System Peak Power 2800 W
Crossover frequency 2.2 KHz
Input Connector 2 x NL4 (speakON compatible) + 1/4″ Jack combo
Hardware N/A
  2 carry handles
Enclosure  
Enclosure Material and finish MDF
Colour Options black paint
Grille Material & Finish steel
Dimensions – Unpacked  
Height 1058 mm / 41.7″
Width Front 444.5 mm / 17.5″
Width Rear 245.3 mm / 9.7″
Depth 429.0 mm / 16.9″
Dimensions – Packed  
Height 1125 mm / 44.3″
Width Front 520 mm / 20.5″
Width Rear 290 mm / 11.4″
Depth 496 mm / 19.5″
Weight  
Net Weight 34.5 kg / 75.9 lbs
Gross Weight 38.9 kg / 85.6 lbs