A new dual 10” line array system – with IPX6 waterproof certification.
Using the same drivers as the acclaimed WLA-210X, the new WLA-210XF model brings extreme power – even in extreme conditions.
Delivering up to 138 dB Max SPL @ 1 meter, each WLA-210XF element is a powerful, all-weather solution.
The system is supported by the dual 15” WLA-210XSUBF subwoofer. With a Max SPL @ 1 meter of 145 dB, this sub also delivers the extreme sonic power needed for the array.
Both the WLA-210XF and WLA-210XSUBF are constructed of premium birch plywood and use aluminium steel rigging hardware. Flat front grilles forged from 3mm aluminium also ensure long lasting looks and durability during transportation and storage.
Model Name | WLA-210XSUBF |
System Type | IPX6 waterproof |
Configuration | 2 x 15″ subwoofer |
Freq Response (+/-3 dB) | 39 Hz – 900 Hz |
Freq Range (-10 dB) | 35 Hz – 1.5 KHz |
Sensitivity (2.83 v / 1 m) | 108 dB |
Calc Max SPL @1 m | 145 dB |
System Impedance | 4 Ω |
LF Transducer | |
Size | 2 x 381 mm / 15” |
Voice Coil Size | 100 mm / 4.0” |
Rated Impedance | 2 x 8 Ω |
LF Power (re:AES2-2012) | 2 x 600 W |
HF Transducer | |
Compression driver | |
Voice Coil Size | |
Exit Size | |
Diaphragm Material | |
Rated Impedance | |
HF (re:AES2-2012) | |
Coverage (H x V) | |
Power | |
Continuous Power | 1200 W |
Programme Power | 2400 W |
Peak Power | 4800 W |
Crossover frequency | No |
Operational Modes: | No |
Input Connector | 1 x WY-24K4Z (waterproof) |
Hardware | Integral |
non adjustable | |
Enclosure Material | 15 mm, 18 mm Ply |
Finish | Waterproof Paint |
Grille Material | 3.0 mm Aluminium |
Dims- (Unpacked) | |
Height Front | 494 mm / 19.4″ |
Height Rear | 494 mm / 19.4″ |
Width | 845 mm / 33.3″ |
Depth | 653 mm / 25.7″ |
Dims – (Packed) | |
Height | 933 mm / 36.7″ |
Width Front | 723 mm / 28.5″ |
Width Rear | 723 mm / 28.5″ |
Depth | 584 mm / 23.0″ |
Weight | |
Net Weight | 81.0 kg / 178.2 lbs |
Gross Weight | 86.4 kg / 190.1 lbs |