The HME 26-II models apply to the requirements of most demanding broadcast applications.
The pre-polarized condenser microphone features brilliant acoustic performance for crystal clear audio transmission in highest broadcast quality and has an excellent feedback rejection.
The closed, supra-aural headphones have a high maximum SPL and are equipped with the ActiveGard©. This limiter can be activated or deactivated.
-
Lightweight with extra soft cushions and excellent wearing comfort
-
Headphones with very accurate sound reproduction for professional applications
-
Microphone for crystal clear audio transmission in highest broadcast quality
-
ActiveGard© (on/off switch) for protected hearing
-
High passive noise attenuation
-
Reliable performance over long lifetime for safe investments
-
Swiveling ear cap allows single sided listening
-
Microphone can either be worn on right or left hand side
-
Modular concept of boom, cable and cushions for highest flexibility
What's in the Box
- 1 headset
- 1 cable clip
- 1 large headband padding
- 1 wind and pop screen
- 1 manual
- Impedance
- 100 Ohm stereo (headphones)
- Characteristic SPL
- 1 kHz, 1 mW: 105 dB1 kHz, 1 V: 115 dB
- Pick-up pattern
- cardioid (BKE 4-4)
- Max. Sound pressure level (active)
- ActiveGard™ switched off: 128 dB at 1 kHz, 200 mWActiveGard© activated: 105 dB at 1 kHz, 200mW
- Frequency response (Microphone)
- 40 to 20.000 Hz
- Transducer principle (Microphone)
- pre-polarized condenser microphone
- Frequency response (Headphones)
- 40 to 18.000 Hz
- Contact pressure
- 3,9 N
- Ear coupling
- supra-aural
- Weight
- (w/o cable and w/o connector) approx. 205 g
- Min. terminating impedance
- 4700 Ω
- Storage temperature
- -55 °C to 70 °C
- Operating temperature
- -15 °C to 55°C
- Maximum sound pressure level (passive)
- 150 dB; 0,5 % THD
- Output voltage
- 4 mV / Pa +/- 2,5 dB
- Operating voltage (stand alone)
- 5 - 15 V DC
- Transducer principle (headphones)
- dynamic, closed